1KV Insulation Tester with PI & DAR 4402

Model : 4402

Insulation Test voltage of 50V, 100V, 250V, 500V & 1000V

Insulation Resistance measuring range upto 20GΩ

Automatic Calculation of Polarization Index and Dielectric Absorption Ratio

Large display with bar graph and backlight

Measures Voltage, Resistance, Continuity and LoΩ

Complies with EN61010 CAT IV 600V

Specifications

Test Voltage DC V (Insulation Resistance)	50V / 100V / 250V / 500V / 1000V
Measuring Range (Insulation Resistance)	1.0GΩ (50V) 2.0GΩ (100V) 5.0GΩ (250V) 10.0GΩ (500V) 20.0GΩ (1000V)
Accuracy (Insulation Resistance)	On 50V range ±(3%rdg+5dgt) On 100V range ±(3%rdg+5dgt) On 250V range 0.15MΩ – 1.50GΩ : ±(3%rdg+5dgt) 5GΩ : ±(10%rdg+3dgt) On 500V range 0.30MΩ – 3.50GΩ : ±(3%rdg+5dgt) 10.0GΩ : ±(10%rdg+3dgt) On 1000V range 0-60MΩ – 6.00GΩ : ±(3%rdg+5dgt) 20.0GΩ : ±(10%rdg+3dgt)
Output current (Insulation Resistance)	1mA DC
Resistance measurement	0-600.0Ω/6.000kΩ/60.00kΩ/600.0kΩ
Accuracy	2%rdg+5dgts
Continuity	0-600.0Ω ±(2%rdg+5dgt)
LoΩ	6.00Ω/60.00Ω
Voltage measurement	0-600V AC/DC
Accuracy	2%rdg+5dgts
Applicable Standards (General)	IEC61010-1 CAT IV 600V, EN 61326-1, IEC61557-1, IEC61557-2, IEC61557-4, IEC61557-10
Power Source (General)	LR6 1.5V (AA ) × 4
Dimension & Weight (General)	206(L) x 90(W) x 5１(H)mm, Approx 630g (Including batteries)
Accessories (General)	Test Leads, Large Jaw Aligator clips, Protective Holster, Carrying case, Batteries LR6 x 4, Instruction manual